Skip Navigation Website Accessibility
 
FREE SHIPPING
ON ORDERS OVER $100

 


FLORIANI'S STITCH N SHAPE

*To fuse fabric to Stitch N Shape® Double or Single Side Fusible:

  1. Begin by laying a heat resistant product such as a Teflon pressing sheet or parchment paper on your ironing board. If using the Double Side Fusible version of Stitch N Shape®, this will prevent the heat from the iron coming through the product and fusing the Stitch N Shape® to your ironing board cover.
  2. Place decorative fabric on top of the Stitch N Shape® (wrong side to the fusible side) and press it in place using a small amount of steam and a medium temperature on your iron. Remember to press, don't "iron"!
    *Tip - Since you are using steam to set the bond between the fabric and the Stitch N Shape®, it is necessary to pre-shrink your fabric for optimal results.
  3. For Double Side Fusible, turn the Stitch N Shape® over and cover the exposed fusible side with the wrong side of the decorative fabric. Press using a small amount of steam once again.
  4. Begin construction of your project, with both fabrics permanently fused in place! Remember to stitch slowly for the best results. If doing embroidery, set your machine speed to 600 stitches per minute or less.